Sun Microsystems Netra t1 100, User And Administration Manual

Page: 42 / 154

20 Netra t1 User and Administration Guide • June 2000
5. Lower the top portion of the strain relief housing so that the three prongs on the
top portion insert into the openings in the DC connector, and push the top and
bottom portions of the strain relief housing together until they snap into place
(see
FIGURE 3-8
).
FIGURE 3-8
Assembling the Strain Relief Housing
What’s Next?
The DC input power cables for your unit are now completely assembled. For
information about connecting the power cords and other cables, see Chapter 6. Do
not power up the system (see Chapter 7) until you have installed any optional
hardware modules you need (see Chapter 4) and installed the system securely into a
rack or cabinet (see Chapter 5).
SysAdmin.book Page 20 Friday, March 30, 2001 2:38 PM