Sun Microsystems Netra t1 100, User And Administration Manual

Page: 43 / 154

21
C H A P T E R
4
Installing Hardware Option
Modules
If you do not want to install any hardware option modules, skip this chapter and go
straight to Chapter 5 which tells you how to install the Netra t1 system into a rack.
This chapter tells you how to install or remove the hot-pluggable hard disk drives
available for the Netra t1. To do this, you do not need to power down the system or
remove it from the rack.
The chapter also tells you how to remove the cover of the Netra t1, how to identify
the parts of the system, and how to install a CD-ROM drive.
For the sales part numbers of the Netra t1 hardware option modules available from
your Sun Enterprise Services representative, see Chapter 10.
The chapter contains the following sections:
■
“Installing or Removing Hot-Pluggable Hard Disk Drives” on page 22
■
“Opening the Netra t1 System” on page 23
■
“Identifying the Parts of the Netra t1” on page 26
■
“Installing a CD-ROM Drive” on page 27
■
“Installing Additional Memory” on page 29
■
“Installing a PCI Card” on page 29
What’s Next?
When you have used this chapter to install the optional hardware modules you
need, go to Chapter 5 for information about installing the Netra t1 into a rack.
SysAdmin.book Page 21 Friday, March 30, 2001 2:38 PM