Struers Discotom-60, Instruction Manual

Page: 244 / 258

Struers A/S
Pederstrupvej 84
DK-2750 Ballerup, Denmark
Phone +45 44 600 800
Fax +45 44 600 801
struers@struers.dk
www.struers.com
Bankers:
Nordea Bank Denmark A/S
Account no.: 2191-0126305060
VAT no.: 15683309
ISO
9001 and 14001 certified QEMS
Letter of conformity
Date 2013-03-14
Letter of conformity: Safety hood/window for the following equipment
AbraPlan-20
PETG thickness: 8 mm
AbraPol-20 PETG thickness: 8 mm
Discotom-5/-6/-10/-60/-65/-100 PETG thickness: 4 mm
Labotom-3 PETG thickness: 4 mm
Labotom-5 PETG thickness: 3 mm
Labotom-15 PETG thickness: 5 mm
Axitom/-5 PETG thickness: 4 mm
Exotom-100/-150 PETG thickness: 4 mm
Magnutom-400/-500 PETG thickness: Front: 10mm, Side: 8mm
The safety hoods/window primary function is to protect against samples not clamped properly.
The safety hood is made from PETG, which is generally used in all Struers machines as “safety glass”.
PETG is resistant to scratches and chemicals and provides the highest degree of safety for the
operator.
Commodity Supplier: RIAS A/S , Industrivej 11, 7000 Roskilde, Denmark
Producer: NEOPLAST ApS , Tingbjergvej 4, 4632 Bjæverskov, Denmark
Supplier: Struers A/S , Pederstrupvej 84, 2750 Ballerup, Denmark
This is to certify that the product is produced according to regulations from the Commodity Supplier.
Yours faithfully
Flemming Perret-Gentil
R&D Manager
R&D Department, Equipment
+45 44 600 913 (direct)
+45 27 130 890 (mobile)
flemming.perret.gentil@struers.dk
www.struers.com