Struers Discotom-60, Instruction Manual, Page: 42 / 258

Discotom-60 /-65
Instruction Manual
38
To set a pass code:

From the CONFIGURATION menu, select Operation mode to
enter the OPERATION MODE PARAMETERS menu.

Push knob to select Pass code.


Use the menu key

to move the cursor (digit selected).
Pressing the key once moves the cursor one place to the
left. (The default pass code is ‘2750’.). Turn knob to
change the digit then press the menu key to move to the
next digit.


Push knob to enter the pass code.
If correct, the pass code will be accepted and the display
will change.


Turn knob to move the cursor to New pass code.


Push knob to select New pass code. Enter your new pass
code as above.
New Pass Code
Please Note
When a pass code is set the operator has 5 attempts to enter the correct
pass code after which the Discotom will be locked.
Re-start Discotom using the Main Switch
then enter the correct pass code.