Struers Discotom-60, Instruction Manual

Page: 41 / 258

Discotom-60 /-65
Instruction Manual
37
The contrast settings of the display can be adjusted to suit individual
preferences (default value: 30, range 0-50).
The Feed and Stop values in the display panel can be set to be
displayed in either mm (default) or inches.
After cutting or after pressing stop button

, the return movement of
the cut-off wheel can be set to one of three different modes:
Start Position:
Discotom automatically retracts the Y-table to its
original position at the time Start

was pressed.
Zero Position: Discotom automatically fully retracts the Y-table to
the front of the machine.
Stay: Discotom does not move the Y-table after cutting.
The language can be set to English (default), German, French,
Spanish, Japanese or Chinese.
It is possible to select three different operation modes. Different
operation modes provide different levels of access to parameters as
follows:
Configuration:
Full functionality, access to all parameters.
Development: No access to parameters in CONFIGURATION
menu, except Display contrast:
Production No access to parameters except Display contrast
and Stop parameters for Absolute and Relative
stop positions if they are being used.
Indicates the type of Cooli unit that is connected to the Discotom.
Configuration Parameters
Display contrast:
Units:
Return position:
Important
Use the Stay function for bakelite bonded diamond or CBN cut-off wheels,
as retraction might destroy the rim of the cut-off wheel.
Language:
Operation mode:
Cooli type: