Struers Discotom-60, Instruction Manual

Page: 20 / 258

Discotom-60 /-65
Instruction Manual
16
In automatic cutting mode the Discotom applies the selected cutting
parameter values for: Feed speed, Stop mode and Motor RPM (D-65
only).
To adjust the values of these parameters:

Turn the knob to highlight a selected cutting parameter.

Push the knob to allow editing of the highlighted parameter. Turn
the knob to change the value of the parameter.

Push the knob to store the new value.
Actual values of the cutting parameters: Feed speed, Stop position
and Motor RPM (D-65 only) are displayed to the right of the columns
(
A ).
Turn the knob to change the value of the selected cutting parameter.
The arrow above the column will move to reflect the new setting (
B ).
Changing Cutting Parameters
Turn knob to select Cutting
Parameter.
Push knob to allow editing of Cutting
Parameter.
Turn knob to adjust value.
Push knob to store new value.
B
A