Stratasys J750/J735/J720 User Guide
4 Operating and Maintaining the Printer
DOC-08040 Rev. R
4-61
15. After confirming all of the items listed in the wizard screen, click
Next
.
Printing material (resin) is jetted from each head and its weight is
automatically recorded. Then, the following screen appears.
Figure 4-82 Emptying the resin container
16. Open the printer. Carefully remove the resin container from the scale and
empty it into the purge unit. Then return the container to the scale.
Caution: The resin in the container is uncured
l
To prevent contact with skin, wear neoprene or nitrile gloves.
l
Dispose of uncured resin in accordance with applicable regulations. By
emptying the container into the purge unit, the resin is stored in the printer’s
sealed waste container.
17. Close the printer cover, confirm the items listed in the wizard screen, and click
Next
.
The printer cures the resin in the container.
18. When the following screen appears, open the printer and remove the scale.
Figure 4-83
Remove Scale
confirmation screen
19. Confirm the items listed in the wizard screen, and click
Next
.