Stratasys J750/J735/J720 User Guide
4 Operating and Maintaining the Printer
DOC-08040 Rev. R
4-22
3. In the
Material Replacement Options
screen,
Both cartridges
is selected for
each position. To print with only one of the cartridges, clear the check box and
then select either the left (
L
) or the right (
R
) cartridge.
Note:
When changing Support material, select
at least two
Support
material cartridge slots—one from A (either L or R) and one from B
(either L or R).
Figure 4-22 Manual cartridge selection
When printing in High Speed mode (three materials), the same material is
used in both sections of each print head. The material selected for one of the
cartridge slots is also used in the other print head channel.
Figure 4-23 Manual cartridge selection—3 Model Materials