Stratasys J750/J735/J720 User Guide
4 Operating and Maintaining the Printer
DOC-08040 Rev. R
4-110
Scanning the Transparency
After printing the test pattern on a transparency, you scan it twice. In addition,
you scan the reference (grid) transparency twice.
Use the scanner currently recommended by Stratasys.
The illustrations in this section show the Canon CanoScan LiDE 400
interface.
If you need to install the software for this scanner, download it from:
For convenience, the scanner should be connected to the computer running
GrabCAD Print.
To scan the transparency:
1. On the computer connected to the scanner, open the scanner utility.
Figure 4-167 Scanner icon
2. In the opening screen, select
ScanGear
.
Figure 4-168 Scanning selection