Stratasys J750/J735/J720 User Guide
4 Operating and Maintaining the Printer
DOC-08040 Rev. R
4-17
10. Click
Next
to begin the material replacement process in the printer.
The
Cartridge Positioning
screen appears, showing you the new location of
all cartridges in the material cabinet.
Figure 4-14 Cartridge placement
Symbols:
The correct cartridge is in this slot.
No cartridge (or the incorrect cartridge) is in this slot.
The cartridge in this slot has insufficient weight to complete the material
replacement process.
The expiration date of the cartridge in this slot has passed.
11. Replace material cartridges as necessary, according to the instructions in the
wizard screen.
12. Click
Start
.
13. Read the warning message, and click
OK
.
If you continue, you must complete the material replacement process before
you can produce models. To replace material cartridges at another time, click
Cancel
. If you continue (by clicking
OK
) and you do not complete the process,
you will need to run the wizard again before producing models.