Stratasys J750/J735/J720 User Guide
4 Operating and Maintaining the Printer
DOC-08040 Rev. R
4-43
16. When the roller is clean, select the confirmation check box in the wizard
screen and click
Next
.
Figure 4-48 Clean-roller confirmation
The roller stops rotating when you click
Next
.
17. Remove the cleaning materials from the printer and close the printer cover.
18. Select the confirmation check boxes in the wizard screen and click
Next
.
The head-purge cycle begins. When this is complete, the final wizard screen
appears.
Figure 4-49 Cleaning wizard—final screen
19. Click
Done
to close the wizard.
Cleaning the Roller Waste Collector and Inspecting the Roller Scraper
The roller waste collector removes waste material scraped from the roller.
Suction removes this waste to the printer’s waste container.
This assembly should be cleaned weekly to prevent a blockage in the tubes
leading to the waste container, so that waste material does not overflow into the
printer.