Stratasys J750/J735/J720 User Guide
4 Operating and Maintaining the Printer
DOC-08040 Rev. R
4-18
Figure 4-15 Final wizard screen
14. In the final wizard screen, click
Done
.
The printer-control application is automatically updated, and it restarts.
When it opens, the interface displays the new material(s).
The interface in the job preparation application is also updated, and it
displays the new material(s).
15. Inspect the area around the purge unit and clean it, if necessary.
Before printing models, you need to run the Head Optimization wizard in
these cases:
• after replacing Vero with Digital ABS or Agilus30 Model materials (and the
reverse)
• after changing the type of Support material (SUP705/706)
• after replacing the Support material with cleaning fluid (and the reverse)
See "Optimizing (Calibrating) Print Heads" on page 4-56