Stratasys J750/J735/J720 User Guide
4 Operating and Maintaining the Printer
DOC-08040 Rev. R
4-11
6. In GrabCAD Print, make sure that the correct slice number is entered in the
dialog box.
Figure 4-8 Slice confirmation in GrabCAD Print
Figure 4-9 Printer interface after interrupted printing
7. If, for any reason, the correct number does not appear in the dialog box, enter
the number and click
OK
.
You cannot continue printing the model if:
• The number of the last slice printed does not appear in the printer interface,
even if the server computer displays the confirmation dialog box.
• There was a relatively long interruption in printing, even if the “last slice” and
indicators are correct. This is because the part already printed might slightly
deform or shrink before printing continues, causing a visible difference
between it and the part of the model printed later. The effects of a printing