Stratasys J750/J735/J720 User Guide
4 Operating and Maintaining the Printer
DOC-08040 Rev. R
4-125
Replacing the Waste Container
Printer waste contains partially cured polymeric material, collected during normal
operation and maintenance of the printer. For safety and environmental reasons,
this material is kept in a special leak-proof, disposable container.
The container has a capacity of 10 kilograms of waste material—usually enough
for several months of printer use. The printer application displays a warning
message when there are 9 kilograms of material in the container, and stops the
printing when the net weight reaches 9.5 kilograms. Above 9 kilograms, the
software does not allow you to start a printing job or activity until you replace the
waste container.
You can monitor the weight of the waste container in the Printer Indicators
display in the printer interface. You can also visually inspect the level of waste in
the container. To access it, see page 4-126.
To monitor the waste weight (and other indicators) in the printer:
➢
In the main printer interface screen, click the display toggle to view the printer
indicators.
Figure 4-183 Printer interface, showing waste weight (red background
indicates operator alert)