Reference
A-10
Applications Manual
10MAY01
ABS Finishing Tips and Techniques
Tools Required
l
Needle-nose pliers
l
Various picks and files
l
One or more small spatulas
l
One or more small chisels
l
120 grit sandpaper
l
320 grit sandpaper
l
Random-orbital sander
l
Detail sander
l
ABS glue
l
Super glue
l
Hot knife
l
Epoxy two-part resin
l
Bondo auto body filler putty
l
High-build primer paint
l
Enamel paint
Removing Supports
1)
Use a small spatula or chisel to pry most of the support away from the part.
This minimizes the risk of damage to the part.
2)
Use a needle-nose pliers and small picks to remove support material from
areas the spatula cannot reach.
3)
Use a file to remove any remaining small bits of support or ooze from the
model.
Finishing Touches Chemical Finishing and Polishing
Summary of Contents for FDM 2000
Page 1: ...Introduction FDM 2000 3000 8000 Release 2 0 Stratasys Document no 105208 0001 Rev B...
Page 17: ...Contents FDM 2000 3000 8000 Manual 10 MAY 01 F2 3 8000 vi...
Page 105: ...Reference N 2 Notes 10MAY01 Release 1 0 October 1997 5 0 May 2001...
Page 131: ...G 1 Reference Glossary 10MAY01 Release 4 0 Glossary Stratasys Document no 105213 0001 Rev B...
