Reference
®
10MAY01
F2/3/8000-47
Set Origin, Go To Origin, and Teach
Set Origin, Go To Origin, and Teach are not used in the mod-
eling process.
Descriptions—Control Panel
Front Panel Functions — General
Each button produces an immediate effect if it is pressed while the FDM is
idle. If the Reset or Stop button is pressed when the FDM head is moving,
it takes effect immediately. The Pause button takes effect after the FDM
finishes its current tool path. You must hold the other buttons down
until the current movement of the FDM head is completed before they
take effect. Otherwise, the system will not react to the button.
The Rapid move button — the unlabeled button at the center of the four
arrow buttons — must be held down while you press one of the arrow
buttons.
The FDM front door has an interlock feature that prevents access to the inside.
To disable the interlock feature, press the Pause button, then open the
door.
Summary of Contents for FDM 2000
Page 1: ...Introduction FDM 2000 3000 8000 Release 2 0 Stratasys Document no 105208 0001 Rev B...
Page 17: ...Contents FDM 2000 3000 8000 Manual 10 MAY 01 F2 3 8000 vi...
Page 105: ...Reference N 2 Notes 10MAY01 Release 1 0 October 1997 5 0 May 2001...
Page 131: ...G 1 Reference Glossary 10MAY01 Release 4 0 Glossary Stratasys Document no 105213 0001 Rev B...
