Stratasys Document Number 206465-0001
Recycling
67
Follow your local recycling guidelines when recycling electronic components.
Removing the EEproms from the material guides
1. Open the model and support material carriers and remove the material guides.
2. With a small standard screwdriver, pry the two material guide halves apart. See
Figure 44
and
Figure
45
.
Figure 44: Pry the model material guide apart
Figure 45: Pry the support material guide apart
3. Recycle the EEPROM per your local electronics recycling guidelines.
4. Recycle the material guides per your local guidelines. See
Table 1 on page 66
.
Pry apart with a small standard
screwdriver
Pry apart with a small standard
screwdriver
Summary of Contents for 180-00108 uPrint
Page 1: ...User Guide ...