manualshive.com logo in svg

Stratasys 180-00108 uPrint, User Manual, Page: 41 / 68

Share
Download
Stratasys 180-00108 uPrint User Manual Download Page 41

Stratasys Document Number 206465-0001

Operation

41

Removing support material

uPrint

 uses soluble support material, designed to allow you to simply wash it away. Your part is left with a 

smooth and clean finish with the fine details intact. The soluble support material can be removed by hand 
with relative ease, but is designed to be dissolved from your parts for hands free finishing.

Refer to the SST process guide for details regarding the removal of soluble support material. A copy of the 
SST Process Guide can be found at 

http://www.uPrintDimension.com

Emptying the purge bucket

Empty the purge bucket after each build. This will ensure the purge bucket does not over fill which can 
cause part quality issues or damage to the printer.

1.  With a gloved hand, lift up on the purge bucket and pull it off of the 2 mounts. See 

Figure 26

Figure 26: Emptying the purge bucket

Warning:

Support material is sharp, wear safety glasses and gloves when removing 

support material.

WARNING

Wear gloves when emptying the purge bucket.

Purge Bucket

Purge Bucket Mounts

Summary of Contents for 180-00108 uPrint





































































Reviews:

No comments