Stratasys Document Number 206465-0001
Operation
45
Figure 30: Properly installed material retaining clips.
8. Place the material spool in the bag that came with the material carrier.
Auto power down
You can set the printer to automatically power down when it completes a build. This option will save energy
usage.
Setting up auto power down:
1. While the printer is building, press the
Auto Power Down
button.
2. Turn the power switch to the off position.
The printer will display
Auto Power Down Mode
and the printer will power down as soon as the build is
complete.
Cancelling auto power down:
1. Turn the power switch back to the ON position.
Powering off
To power off the printer, turn the power switch to the OFF position. See
“Powering ON the printer:” on
page 24
for instructions.
You can do this at anytime without harming the printer. No other steps are
necessary. If this is done while the printer is building a part, the current part will not be completed.
Note:
System cooling fans and lights will continue to operate for several
minutes after the switch has been turned off.
Resuming operations from Standby mode
After several minutes of inactivity, the printer will enter Standby mode. During Standby, the head
temperature will decrease to conserve energy.
Continue operation from Standby mode:
1. From the display panel press
Resume
Summary of Contents for 180-00108 uPrint
Page 1: ...User Guide ...