Stratasys Document Number 206465-0001
Setup
27
C. A new pop-up window,
Add 3D Printer
, should list your printer in the main window (identified by its
UDN). Click on the printer in this window and enter a Name and Location (your choice) in the lower
portion of the pop-up window.
D. Click
Add Printer
and you are ready to go. Close the 3D Printer pop-up window.
12. If your printer is not displayed in the
Add 3D Printer
pop-up window, you will need to add the printer IP
address manually.
A. From the General Tab, click the
Manage 3D Printers
button.
B. Click the
Add Manually
button in the lower right corner of the pop-up window.
C. In the pop-up window
Add 3D Printer
, enter a Name and Location (your choice) for your printer in
the appropriate fields.
D. Enter the IP Address for your printer in the appropriate field. It will be the same address as the one
listed in step 4.
E. Select the appropriate printer type from the drop down list.
F. Click
Add Printer
and close the 3D Printer pop-up window.
13. If you are unable to connect the printer to your PC, contact your Network Administrator.
Connecting Directly To Your PC (if no network is available)
You can also connect the
uPrint
3D printer directly to your PC without the use of a network. This is most
easily accomplished with the printer in Dynamic Network mode (as received from the factory).
Connecting directly to the PC with a crossover cable:
1. Connect a crossover cable from your printer directly in to the network port on your PC. (A crossover
cable (orange) is included with the Startup Kit)
2. Make sure the printer is “ON” and determine the Unique Device Name (UDN) for your printer.
A. From
Idle
(or
Ready to Build
), from the display panel press
Maintenance
. The panel diplays
System Maintenance
and the Software version.
B. Press the
System
button. The top window displays:
Network Admin - Dynamic IP Address;
UDN
.
The UDN for your printer is displayed here. This is preset at the factory and cannot be changed.
3. From your PC, start the CatalystEX application.
A. From the General Tab, click the “Manage 3D Printers” button.
B. Click the “Add from Network...” button in the lower right corner of the pop-up window.
C. A new pop-up window, “Add 3D Printer”, should list your printer in the main window (identified by
its UDN). Click on the printer in this window and enter a Name and Location (your choice) in the
lower portion of the pop-up window.
Note:
It may take up to 1 minute for your printer to appear in the pop-up
window.
D. Click “Add Printer” and you are ready to go. Close the “3D Printers” pop-up window.
4. If the printer does not appear in the pop-up window:
Summary of Contents for 180-00108 uPrint
Page 1: ...User Guide ...