Stratasys Document Number 206465-0001
Troubleshooting and Maintenance
60
Figure 39: Tip Removal
B. Use needle nose pliers to grasp the stainless steel shield of the tip.
C. Pull the tip shield toward you, then pull down to remove the tip. Discard the used tip. See
Figure
40
.
Figure 40: Remove the tips
D. Repeat for second tip if necessary.
Installing Tips:
1. For
uPrint
3D Printer, you must identify the correct replacement tip. You must make sure a SUPPORT
tip is used on the LEFT side of the head assembly. A MODEL tip must be used on the RIGHT side of
the head assembly (See
Figure 41
). The Model tip comes in a red capped container. The Support tip
comes in a black capped container.
Loosen but do
not remove
Loosen but do
not remove
Pull tips down to
remove
Summary of Contents for 180-00108 uPrint
Page 1: ...User Guide ...