Stratasys Document Number 206465-0001
Operation
44
Figure 27: Material retaining clips
3. Place the material guide in the material guide slot on the spool. See
Figure 28
.
4. Place the material in the material detents. See
Figure 28
.
Figure 28: Material guide slot and detents
5. Cut the excess material from material guide.
6. Place the material retaining clips on the spool before removing the spool from the carrier. See
Figure
29
.
A. Push the material retaining clips over the material and clip on to the material spool.
B. Push the material retaining clips down until they lock in place.
Figure 29: Installing material retaining clips
7. Remove the material spool from the material carrier. See
Figure 30
.
Material retaining clips
Material detents
Material guide slot
Place clip here and push
down to lock in place
Summary of Contents for 180-00108 uPrint
Page 1: ...User Guide ...