Stratasys Document Number 206465-0001
Troubleshooting and Maintenance
50
Welcome Kit Tools
The
uPrint
Welcome Kit contains replacement parts and a set of tools used to help you maintain the
system.The following is a list of the tools contained in the Startup Kit.
•
Needle Nose Pliers
•
T-Handled Wrench - 1/8 inch
•
T-Handled Wrench - 7/64 inch
•
Gloves (Pair)
•
Cutters
•
Brush
•
Magnifier
Diagnosing Loss of Extrusion
Occasionally, the printer’s head may experience loss of extrusion. This will be evident by observing one of
the following:
•
Seeing the head moving with no material coming out of either extrusion tip
•
The height of the model and support materials are not equal
•
Sagging structures due to lack of support materials
Diagnose loss of extrusion:
1. From the display panel press
Cancel
and remove any parts from the printer.
2. Insert a new modeling base.
3. From
Idle
, press
Maintenance
A. Press
Machine
.
B. Press
Head
. The head will come to rest in the center of the chamber and the Z Platform will
change position.
The display will read:
Model Drive Motor Stopped
WARNING
The head area is hot. Use gloves when working in this area of printer.
Summary of Contents for 180-00108 uPrint
Page 1: ...User Guide ...