manualshive.com logo in svg

Stratasys 180-00108 uPrint, User Manual, Page: 48 / 68

Share
Download
Stratasys 180-00108 uPrint User Manual Download Page 48

Stratasys Document Number 206465-0001

Troubleshooting and Maintenance

48

Build Error

Partial or bad part file sent to system. Check STL file 
validity in CAD software; reprocess STL in Catalyst and 
redownload to system.

Can’t Find Home – 
Check Modeling Base

Verify a modeling base is inserted.

Modeling base may be used or defective – replace.

Material Error

Filament error

Remove Carrier

Check Filament

Remove the carrier and verify material is coming out of the 
material guide.

Verify material pulls freely from the carrier.

Reload material.

Material Error

Filament blocked

Remove Carrier

Clear filament path

Remove carrier and verify material pulls freely from carrier.

Verify the material tubes are free of material.

Reload material.

Material Error

Carrier invalid

Remove carrier

Remove carrier and verify it is not empty.

Replace material spool.

Material Error

Filament broken

Remove carrier

Clear filament path

Remove the carrier and verify material is coming out of the 
material guide.

Verify material pulls freely from the carrier.

Verify the material tubes are free of material.

Material Error

Carrier invalid

Remove carrier

Clear filament path

Remove carrier and clear material tubes.

Replace material spool.

Load Error

Filament error

Remove carrier

Clear filament path

Remove the carrier and verify material is coming out of the 
material guide.

Verify material pulls freely from the carrier.

Verify the material tubes are free of material.

Load Error

Filament blocked

Remove carrier

Clear filament path

Remove the carrier and verify material is coming out of the 
material guide.

Verify the material pulls freely from the carrier.

Verify the material tubes are free of material.

Problem or error 
message on display 
panel

Solution

Summary of Contents for 180-00108 uPrint





































































Reviews:

No comments