Stiegelmeyer Evario, Instruction Manual, Page: 88 / 168

Instruction manual for Evario hospital bed
88
9.10.2 On the Control Box
x
This position can be set from any mattress base height.
x
The maximum angle of tilt is up to 15° in every direction.
x
If necessary, the height will be automatically adjusted.
9.10.2.1 Reverting to Horizontal Bed Position
9.10.3 On the Control Panel (Outside)
To adjust the bed to a Trendelenburg or reverse-Trendelenburg position, you must first of
all switch over to the staff control level.
1 Press the settings button. The CPR symbol appears on the display.
2 Select the Trendelenburg position using
the toggle button.
3 Press the DOWN button until the bed is
set to a Trendelenburg position.
To obtain a reverse-Trendelenburg posi-
tion, press the UP button.
1 Press the unlock button and the Trendelenburg position button
until the full extent or the desired position is reached.
1 Press the unlock button and the reverse-Trendelenburg button
at the same time.
The mattress base automatically moves to a horizontal position,
and stops there: