Stiegelmeyer Evario, Instruction Manual, Page: 150 / 168

Instruction manual for Evario hospital bed
150
15.5 Fault Indication on the Control Box and Locking Box
If your bed is fitted with this equipment, it is easy to obtain a quick overview of the functional status
and to perform a RESET (to acknowledge error messages) if necessary.
For safety reasons, if a serious error is detected, all functions are locked electronically.
Any faults that are recognised are displayed by the locking LEDs flashing on the control
box/locking box, making it easier to rectify the fault
The table below shows the fault indications on the control box and the locking box as well as pos-
sible solutions.
A2 B1 B2 C1 C2 D1 D2 Acoustic
signal
when
button
pressed Error Solution
X X Thigh rest motor (socket 2) limit
switch Check / replace
cable + plug-in
connections
+ acknowledge
fault (RESET;
Chapter 15.6)
More rarely: Re-
place the motor
X X Mattress base height motor limit
switch, head end (socket 1)
X X X Position sensor for mattress
base height motor, head end
(socket 1)
X X Mattress base height motor limit
switch, foot end (socket 3)
X X X Position sensor for mattress
base height motor, foot end
(socket 3)
X X X X Fault in a control unit (e.g.
jammed button, broken cable),
more rarely: internal fault in the
control unit Check each con-
trol unit, replace
any faulty control
unit or cable
+ acknowledge
fault (RESET;
Chapter 15.6)
More rarely: Re-
place control unit
Fig. 32: Fault indications on locking box