Stiegelmeyer Evario, Instruction Manual, Page: 142 / 168

Instruction manual for Evario hospital bed
142
14.11
Programming the Integrated (Outside) Control Panel
It is necessary to programme the integrated control panel in the following
cases:
x
If you are connecting a different control panel to the existing control unit,
x
If a new control unit is connected.
During programming, the control panel recognises the range of functions of the control unit
and is adapted accordingly. The control panel will not work unless it has been pro-
grammed! Only the outside control panel needs to be programmed. The integrated (inside)
control panel is programmed automatically.
IMPORTANT
The control panel must only be programmed by technical staff or qualified medical staff who have
been trained by the operator to do so.
Option 1 (only if this is the first control unit to be registered)
1 The warning triangle symbol is displayed
on the LCD handset. All adjustment op-
tions are locked.
3 Proceed from now on as described in steps
4-8 in Chapter 14.10.
2 Press the
“Settings” button
and keep it
pressed for about 2 seconds until OK!
appears in the display.
If this does not work, use
Option 2
1 The warning triangle symbol is displayed
on the LCD handset. All adjustment op-
tions are locked.
3 Keep both the UP and DOWN buttons
pressed for a further 5 seconds until OK ! is
displayed.
2 Press the UP and DOWN buttons simul-
taneously and keep them pressed, and at
the same time press the “Settings” button
briefly.
4 Proceed from now on as described in steps
4-8 in Chapter 14.9