Stiegelmeyer Evario, Instruction Manual, Page: 108 / 168

Instruction manual for Evario hospital bed
108
6 Press the UP button twice. After pressing
the button for the first time, the symbol for
the maximum mattress base height ap-
pears together with the ‘save’ symbol.
7 After pressing the button for the second
time, the OK ! displayed indicates the suc-
cessful pre-setting of the mattress base
height restriction. The symbol for the maxi-
mum mattress base height is then displayed
again.
11.3.1.1 Deleting the Maximum Mattress Base Height Setting
1 Repeat steps 2 - 5 from the Chapter
11.3.1. Press the UP button. The maxi-
mum mattress base height symbol will
appear on the display and the status
message X will be displayed for the delet-
ed function.
2 Press the DOWN button once. After press-
ing the button, the OK ! displayed indicates
the successful deletion of the mattress base
height restriction.
11.3.2 On the Control Panel (Outside)
1 Press the UP and DOWN buttons simul-
taneously and keep them pressed, and at
the same time press the settings button
briefly.
2 Keep the
“Settings”
button pressed for 5
seconds until the warning triangle symbol
disappears and OK! appears.
3 Proceed now as described in steps 4-7 in
Chapter 11.3.1.