Installation and Service Manual
55
SK 2055 / 2070 / 2090
9.2.1 Pay attention to safety
When carrying out inspection and maintenance, always set the Freedomlift to
the lowest position and switch off the mains power supply switch (position 0).
Secure the switch using a padlock.
If the Freedomlift is in a higher position, always lower it into the safety lock.
Always pay attention to safety. Work on installations and devices can only
be safe if the corresponding instructions are carried out to the letter and all
protection devices are left in place.
It is the responsibility of those in charge of preparing or surveying work, to take
the necessary steps to guarantee safe working conditions.
The supply voltage may only be switched on temporarily and the Freedomliftset
to a higher position if these actions are required for specific adjustments and
checks.
9.2.2 Recommendations for maintenance
When performing maintenance on your Freedomlift, keep in mind the following
recommendations:
• Keep the Freedomlift clean at all times.
• Repair damaged or worn parts promptly.
• Ensure that all fasteners are secured after maintenance.
• Do not attempt to operate defective equipment.
• Follow the safety instructions in this manual.
• Follow the safety regulations that apply to your site.
• For repairs and maintenance, always use original Stertil B.V. parts.
Summary of Contents for Freedomlift SK 2055
Page 108: ...Installation and Service Manual 108 SK 2055 2070 2090 14 2 Electrical diagram 3 x 230V ...
Page 109: ...Installation and Service Manual 109 SK 2055 2070 2090 14 3 Electrical diagram 3 x 400V ...
Page 113: ...Installation and Service Manual 113 SK 2055 2070 2090 14 6 Dimensions SK 2055 3 piece arms ...