stertil-KONI Freedomlift SK 2055, Installation And Service Manual

Page: 14 / 118

Installation and Service Manual 14 SK 2055 / 2070 / 2090
machine. Test to verify the isolation of the machine. Make certain that the
machine will not operate (power cannot be turned on).
The machine is now locked out.
Return all operating control(s) to the OFF position after verifying the isolation of
the machine.
2.6.2 Ending lock-out/tag-out procedure
1. Make sure the service or maintenance is completed and the machine is
ready to return to normal operation.
2. Check the machine and the immediate area around to make sure that all
non-essential items have been removed.
3. Make sure that all components of the machine are operationally intact.
4. Make sure that all persons are at a safe distance from the machine.
5. Verify that the power switch is in the OFF position.
6. Remove the lockout devices.
7. Notify all personnel that the service or maintenance is completed and the
machine is ready for use.
2.7 Risks
The has been carefully designed and expertly built for safe operation. The
European certifications confirm this. There are, however, still dangers and
safety risks which cannot be ruled out. These risks are inherent to operators
using the machine.
It is therefore of utmost importance that precautions will be taken when working
with the to exclude potential risks.
2.8 Hazards
2.8.1 Electrical hazards
Precautions to be taken when working with electrical equipment: