![background image](http://html.mh-extra.com/html/stertil-koni/freedomlift-sk-2055/freedomlift-sk-2055_installation-and-service-manual_1375427067.webp)
Installation and Service Manual
67
SK 2055 / 2070 / 2090
6
7
5
1
5
1
3
1
2
9b
4. Insert the cables (5) at the top of the aluminium profiles, with the short end
down. Connect the cables (6 and 7) with the plug connector to the cables
(5) and push the cables downwards until the small plug connectors are in
front of the big holes. See figure above.
5. Gently pull the small plug connectors out the hole with needle nose pliers
out and connect them to the led engines (2).
6. Now carefully pull the cable at the top as far as possible, so that the cable
extent disappears into the big hole.
7. Assemble the lower led engine (2) with the two Allen screws. In this case
do not use the mounting plates that are provided.
8. Install the light tube (3) between the led engines using a swivel and two O-
rings. Slide the nut over the end of the light tube and then two O - rings. Do
the same on the other end of the light tube.
9. Attach the swivels to the led engines and then tighten the screws.
10. Place the slats stop (9a and b) in the aluminium profiles.
11. To attach the transformer (4), adjust the holes in the mounting plate to a M5
threading. The mounting plate may be loosened at the bottom and top of
the control box and be pulled forward a bit in order to tap the holes.
Summary of Contents for Freedomlift SK 2055
Page 108: ...Installation and Service Manual 108 SK 2055 2070 2090 14 2 Electrical diagram 3 x 230V ...
Page 109: ...Installation and Service Manual 109 SK 2055 2070 2090 14 3 Electrical diagram 3 x 400V ...
Page 113: ...Installation and Service Manual 113 SK 2055 2070 2090 14 6 Dimensions SK 2055 3 piece arms ...