stertil-KONI Freedomlift SK 2055, Installation And Service Manual

Page: 34 / 118

Installation and Service Manual 34 SK 2055 / 2070 / 2090
3. Attach the hoisting equipment to the hoisting eye of post I.
4. Set post I upright above the chemical anchors that have already been
placed in the floor.
One post weighs around 800 kg. The posts should only be lifted using
appropriate hoisting equipment attached to the hoisting eye at the top of
the post. Do not remove the hoisting equipment before the post has been
secured in place.
5. Fasten the posts temporarily by screwing the nuts onto the anchor bolts.
During transport, the hydraulic cylinder may be moved. Check the correct
position of the cylinder and, if required, reposition the cylinder.
!
6. Follow steps 3 up to 6 for post II.
7. Adjust the posts so that they are straight with the help of 90 x 30 x 0.5 mm
and 90 x 30 x 1 mm shims between the anchor bolts.