Installation and Service Manual
10
SK 2055 / 2070 / 2090
rules and guidelines can be, but are not limited to local health and safety
regulations and the guidelines provided by professional associations.
• The machine manual must be available at the machine at all times.
• Read the operating instructions before you operate or maintain the machine.
• Make sure you have obtained, read and understood all instructions.
• Make sure you have obtained, read and understood any additional
instructions for special accessories for the machine.
• Carry out all work with and on the machine as described in the manual.
• Never start or operate a damaged machine.
• Always make sure that the machine is complete before operation. Operating
the machine with missing components can cause severe damage.
• Observe all signs with safety and danger notes. Replace warning and/or
safety signs immediately if they are missing or illegible.
• Do not perform any tasks for which you are not authorized. Only explicitly
qualified and authorized personnel may operate, maintain or repair the
machine.
• Personnel in training must be supervised at all times.
• Wear and use all needed personal protection equipment and safety gear
appropriate for the job.
• Keep a safe working environment.
• If necessary, make sure the machine complies with federal and local
standards before starting work.
• Do not use the machine for purposes other than those specified.
• All personnel working on or with the machine must be aware of possible
hazards.
• Never make any changes or additions to the machine, without obtaining
explicit written approval from the manufacturer/supplier. This also applies to
the installation and adjustment of safety devices.
•
Read all instructions.
•
To reduce the risk of fire, do not operate equipment in the vicinity of
open contianers of flammable liquids (gasoline).
•
Provide adequate ventilation when working on internal combustion
engines.
•
Keep hair, loose clothing, fingers and all parts of the body away from
moving parts.
•
To reduce the risk of electrical shock, do not use on wet surfaces or
expose to rain.
•
Use only as described in this manual. Use only manufacturers
recommended attachments.
•
Always wear safety glasses. Everyday eye glasses only have impact
resistant lenses they are not safety glasses.
•
Use by untrained people could result in serious injury and/or damage.
•
Only authorized persons should operate the vehicle lift. These persons
are in any case familiar with the operating instructions of the lift.
Summary of Contents for Freedomlift SK 2055
Page 108: ...Installation and Service Manual 108 SK 2055 2070 2090 14 2 Electrical diagram 3 x 230V ...
Page 109: ...Installation and Service Manual 109 SK 2055 2070 2090 14 3 Electrical diagram 3 x 400V ...
Page 113: ...Installation and Service Manual 113 SK 2055 2070 2090 14 6 Dimensions SK 2055 3 piece arms ...