background image

Vista 

DOT — Public Use Lift 

DOT — Public Use Lift 

“DOT — Public Use Lift” verifies that this platform lift meets the
“public use lift” requirements of FMVSS No. 403.  This lift may be
installed on all vehicles appropriate for the size and weight of the
lift, but must be installed on buses, school buses, and multi- 
purpose passenger vehicles other than motor homes with a gross
vehicle weight rating (GVWR) that exceeds 4,536 kg (10,000 lb). 

Public Use Wheelchair Lifts 

05

HZg^Zh

HZg^Zh

CKA

CKA

Series

05

Service Manual for: 

33204 Rev. A

February

2008

"Providing Access to the World" 

®

®

W A R N I N G 

Read manual
before installing
or servicing lift.
Failure to do so
may result in
serious bodily
injury and/or 
property damage. 

ual

Man

Patent #5,261,779

Patent #6,065,924

Patent #6,238,169

Patent #6,464,447

Patent #6,599,079

Patent #6,692,217

Patent #6,739,824

Patent #6,837,670

Patent #5,261,779

Patent #6,065,924

Patent #6,238,169

Patent #6,464,447

Patent #6,599,079

Patent #6,692,217

Patent #6,739,824

Patent #6,837,670

Patent #5,261,779

Patent #6,065,924

Patent #6,238,169

Patent #6,464,447

Patent #5,261,779

Patent #6,065,924

Patent #6,238,169

Patent #6,464,447

Braun NVL Series 

Braun NVL Series 

Patents Pending

Patents Pending

International Corporate Hdqrs:   P.O. Box 310    Winamac, IN 46996  USA

1-800-THE LIFT

®

       (574) 946-6153       FAX: (574) 946-4670

Summary of Contents for NVL Vista 05 Series































Reviews: