6-4
122993-622
Operator Manual
Routine Maintenance
13.0
OPTIONAL GARB-EL SECTION – INTEGRATED
13.1
Grease Garb-el chains and bearings.
2 X/year
13.2
Inspect spray jets. Align and clean as necessary.
6 X/year
13.3
Verify Garb-el belt tension. Adjust if necessary.
2 X/year
14.0
FINAL TEST*
14.1
Clean lint and dirt from components.
6 X/year
14.2
Run machine through two cycles to verify proper operation. Verify all displays
6 X/year
and printouts.
14.3
Remove all test equipment installed for inspection.
6 X/year
14.4
Install any panel or cover removed during inspection.
6 X/year
14.5
Inspect work area and washer to ensure removal of all materials used during inspection.
6 X/year
Table 6-1. Preventive Maintenance Schedule (Cont'd)
Recommended frequency of inspection is indicated in the right column. Usage, and utility
Suggested
conditions may require more or less frequent inspections. Tasks are defined on a yearly basis.
Frequency
* Contact STERIS for this service. Service charges may be incurred. Consult your warranty for details.
