manualshive.com logo in svg

Steris Basil 6000, Operator'S Manual

Share
Download
Steris Basil 6000 Operator'S Manual Download Page 16

3-4

122993-622

Operator Manual

Component Identification

The two line alpha-numeric screen displays cycle program data on demand,
in-cycle performance data, and operator instructions. Display screen also
indicates certain abnormal conditions that may occur during a cycle.

•

CYCLE MENU

 touch pad - press to view the first cycle menu. Press again

to advance the screen to the next cycle menu. Three menus are available,
each with four cycles.

•

SELECT CYCLE

 

touch pad - press until the desired cycle name flashes.

NOTE: When a displayed cycle name or phase value is selected, the
corresponding word or digit flashes.

•

REVIEW CYCLE

 touch pad - press to review the cycle phases and values

programmed for the selected cycle.

•

CYCLE/START

 touch pad - press once to display the name of the selected

cycle.  Press a second time to start the cycle.

NOTE: The selected cycle name remains on the screen for five seconds after
pressing CYCLE/START touch pad once. To start a cycle, CYCLE/START
touch pad must be pressed a second time while the selected cycle name is
displayed. If touch pad is not pressed within the five seconds, screen
automatically returns to the cycle menu.

•

STOP/RESET

 touch pad - press once to stop operation of the cycle. Press

a second time to abort cycle and return screen to the cycle menu.

NOTE: When cycle is stopped, press CYCLE/START touch pad once to
resume cycle operation. Cycle operation resumes. When cycle is aborted,
cycle operation is discontinued and cycle must be restarted.

•

•

•

•

•

EXTEND PHASE

 touch pad -  press to double the programmed treatment

time while reviewing a cycle in Review Cycle mode, Refer to 

Section 4,

Operating Instructions, for instructions on extending treatment time.

•

•

•

•

•

BY-PASS PHASE

 touch pad -  press to by-pass the programmed treatment

time while reviewing a cycle in Review Cycle mode, Refer to 

Section 4,

Operating Instructions, for instructions on by-passing treatment time.

•

MANUAL MENU

 touch pad - press to view the washer functions which can

be controlled manually.

•

ALARM REPLY

 

touch pad - press to turn off alarm buzzer and acknowledge

the displayed alarm message. Refer to 

Section 7, Troubleshooting,    for

specific alarm conditions and corrective actions.

3.3.1  Display Screen

3.3.2  Cycle Status Touch

Pads

3.3.3   Manual Control

Touch Pads

CYCLE

MENU

SELECT

CYCLE

REVIEW

CYCLE

CYCLE
START

STOP

RESET

ALARM

REPLY

EXTEND

PHASE

MANUAL

MENU

BY-PASS

PHASE

Summary of Contents for Basil 6000
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands