4-4
122993-622
Operator Manual
Operating Instructions
5.
To start selected cycle, press
CYCLE/START
touch pad a second time
while selected cycle name is displayed.
NOTE: If
CYCLE/START
touch pad is not pressed a second time while the
selected cycle name is displayed, display automatically returns to the cycle
menu.
Once selected cycle is started, printer message is:
==============================
CYCLE - CYCLE 01
=============================
CYCLE START
HH:MM:SS
CYCLE DATE
MM:DD:YY
UNIT NUMBER
36XXXXXXXX
-------------------------------------------------------
TANKS DUMP IN XX DAYS
AT HH:MM:SS AM
-------------------------------------------------------
Washer automatically progresses through selected cycle.
NOTE: When operating the unit, note the following:
1) If temperature guarantee feature is selected, belt stops if the solution/
water temperature in chamber sump is lower than the set point. There is a
G after temperature on the display if the guarantee is on.
2) Cycle operation may be halted at any time by pressing
STOP/RESET
touch pad once. To resume cycle operation, press
CYCLE/START
touch
pad.To abort cycle operation, press
STOP/RESET
touch pad a second
time.
During cycle, display alternates between following messages, every four
seconds:
ALK. TEMP =
XXX.X F
ACID* TEMP =
XXX.X F
*RINSE if acid is not present.
and:
RINSE TEMP =
XXX.X F
FINAL RINSE* =
XXX.X F
*Only if unit has two wash chambers.
NOTE: If proximity switch conveyor stop option is provided, washer must
be equipped with the discharge conveyor option. Proximity switch conveyor
stop can only be installed in the optional discharge conveyor.
Printer records tank temperatures on a timed interval set in operating
values menu. In each section, the following occurs:
•
•
•
•
•
PRE-WASH
Hot water from the rinse tank is sprayed on load and goes down the
drain.
•
•
•
•
•
ACID OR ALKALINE WASH
Heated detergent solution from the alkaline or acid sump is pumped
through the spray header, over and under the load, then falls back into
the alkaline or tank sump to be recirculated.
CYCLE
START
