5-1
Cycle and Control Value Programming
Operator Manual
122993-622
5.1 Program Touch
Pads
CYCLE AND CONTROL VALUE PROGRAMMING
IMPORTANT:
A listing of the Safety Precautions to be observed when
operating and servicing this equipment can be found in Section 1 of this
manual. Do not operate or service the equipment until you have become
familiar with this information.
The microprocessor control of the Basil
®
6000 Tunnel Cage Washer allows the
adjustment of previously programmed cycles to process different types of
loads. All program changes are made using the program touch pads on the
washer control panel.
Program touch pads function as follows (see Figure 5-1):
•
CHANGE VALUES
touch pad - press to access Change Values mode.
•
CURSOR arrows (left or right)
- press until item to be changed (word, letter,
or number) flashes.
•
VALUE arrows (up or down)
- depending on the item flashing (selected),
press to either toggle between answer selections or scroll through the
alphabet and numbers 0 through 9.
NOTE: Alphabet includes characters for an underline and a space (
■
).
•
SAVE VALUES
touch pad - press to save changes made, exit the Change
Values mode, and return screen to the cycle menu.
5
The Change Values mode allows authorized operators to change both the
cycle values and general operating values. In Change Values mode, the cycles
may be altered and saved as custom cycle programs to meet specific washer
needs.
Figure 5-1. Program Touch Pads
5.2 Change Values
Mode
