5-7
Cycle and Control Value Programming
Operator Manual
122993-622
The following procedure is based on a washer equipped with certain optional
features. This washer shows messages pertaining to specific optional func-
tions. The specific optional messages change the sequence of messages and
additional messages are shown in the following pages to accommodate
various washer configurations.
NOTE: The demonstration cycle is set with the access code feature OFF.
1.
Set
POWER-OFF/STANDBY
switch, located behind printer door, to
POWER
. Unit name temporarily appears, then display shows first cycle
menu:
CYCLE 1
CYCLE 2
CYCLE 3
CYCLE 4
__ Indicates flashing position.
2.
Press
CHANGE VALUES
touch pad to access Change Values mode.
NOTE: Access to operating values may be made through any cycle.
First change values display appears:
CHANGE CYCLE NAME
CYCLE 1
__ Indicates flashing position.
NOTE: Change Values mode may be exited at any time by pressing
SAVE
VALUES
touch pad. Control saves changed values and returns to selected
cycle menu.
3.
Press
CHANGE VALUES
touch pad several times to advance through
phase values displays until print cycle values option appears. Display
shows:
PRINT CYCLE VALUES?
NO
__ Indicates flashing position.
4.
Press
VALUE arrows
(up or down) to toggle between YES and NO.
NOTE: Selecting YES generates a printout of the cycle phase values once
SAVE VALUES
touch pad or
CHANGE VALUES
touch pad is pressed.
5.
Press
CHANGE VALUES
touch pad. Change operating values option
appears. Display shows:
CHANGE OPERATING
VALUES?
NO
__ Indicates flashing position.
6. Press
CHANGE VALUES
touch pad..... Display shows:
PRINTER ENABLED?
YES
__ Indicates flashing position.
CHANGE
VALUES
CHANGE
VALUES
CHANGE
VALUES
5.2.2 Programming
Operating Values
CHANGE
VALUES
