US and Canada 800.683.2378, International 904.641.1666
S Series FW 3.02.02
97
CLEANING THE POINT OF INJECTION – SAFETY INFORMATION
NOTICE: Indicates special instructions or general mandatory action.
NOTICE:
Pumps are supplied with an injection fitting or check valve. All allow the extension tip to be installed in the
center of the pipe directly in the flow of water to help reduce deposit accumulation.
Warns about hazards that CAN cause death, serious personal injury, or property damage
if ignored.
This is the safety alert symbol. When displayed in this manual or on the equipment, look for one of the
following signal words alerting you to the potential for personal injury or property damage.
HAZARDOUS PRESSURE/CHEMICAL EXPOSURE:
Use caution and bleed off all resident system pressure prior to attempting service
or installation.
Use caution when disconnecting discharge line from pump. Discharge line may be under pressure. Discharge line
may contain chemical.
To reduce risk of exposure, the use of proper personal protective equipment is mandatory when working on or near
chemical metering pumps.
