S Series FW 3.02.02
www.stenner.com
30
CONFIGURATION MENU
continued
To
Configuration
menu
Reset To Defaults?
Configuration
- Modbus Setup
- Firmware Version
- Reset Pump
Yes
yes/no
set
Are you sure?
Yes
yes/no
set
Reset To Defaults?
No
yes/no
set
Are you sure?
No
yes/no
set
Reset pump to
factory default.
Go to
Main Menu
Select “Yes” and press ENTER to
return the pump to factory
default settings. You will be asked
to confirm this action.
Select “No” and press ENTER to
return to
Configuration
menu
without resetting the pump.
Select “Yes” to confirm
resetting the pump to factory
defaults and returning to the
Main Menu.
Select “No” to return to
Configuration
menu without
resetting the pump.
To
Configuration
menu
Sets a value in a menu
NAVIGATION
Moves one step back in
a menu, when permitted
Moves up in a menu, toggles
between options, or increase a value
Moves down in a menu, toggles
between options, or decreases a value
Holding the or button causes the numbers to change rapidly.
RESET PUMP
Allows user to reset the pump and return the pump to factory default settings.
NOTE: When resetting a pump with firmware version 2.01.04 or higher, the 4-20mA input signal calibration will be
restored to factory defaults.
