The pump will indicate if the password was
accepted or not and the screen
will return to
Configuration
menu.
S Series FW 3.02.02
www.stenner.com
20
CONFIGURATION MENU
continued
PASSWORD
Allows user to set a password to prevent unauthorized changes to the pump settings.
• Each digit can be set for 0-9 or A-Z.
• When the password is set, it must be entered during the Operating Display mode (in
Run Pump
) in order to enter the
Main Menu
.
• Leaving the password blank disables the password feature. The password is disabled by default.
Displays message for 3 seconds and
returns to
Configuration
menu.
Configuration
- Clock
- Calibration
- Password
Enter Password
0-9, A-Z
set
Confirm Password
0-9, A-Z
set
PASSWORD
ACCEPTED
If password was
accepted.
If no password was entered.
Displays message
for 3 seconds
and returns to
Configuration
menu.
Sets a value in a menu
NAVIGATION
Moves one step back in
a menu, when permitted
Moves up in a menu, toggles
between options, or increase a value
Moves down in a menu, toggles
between options, or decreases a value
Holding the or button causes the numbers to change rapidly.
To
Configuration
menu
PASSWORD DID NOT
MATCH. PLEASE
RE-ENTER PASSWORD
ok
PASSWORD
DISABLED
If password
was not accepted.
