S Series FW 3.02.02
www.stenner.com
64
OPERATING DISPLAY
continued
Run Pump?
Yes
yes/no
select
PPM
100
%
Prime
PPM
22
RPM
PPM
20.0
GPD
PPM
0.83
GPH
PPM
1.77
oz/min
Hold for 2 seconds
PPM
OFF
%
To Password Entry Display if
display is locked. To
Main
Menu
if unlocked.
If unlocked or password not set.
Metric is displayed if
selected in
Configuration
Pump runs at 100% speed while
the PRIME button is pressed (if
unlocked or password not set).
50.0
PPM
%
While the pump
receives a pulse, the
display will show a
closed contact
PPM FEED, CONSTANT FLOW
NAVIGATION IN OPERATING MODE
• If a password is set, the pump controls will lock out after 60 seconds if there is no keypad activity.
• To unlock the pump, press ENTER for 2 seconds. The pump will display a prompt to enter a password.
ENTER
Press and hold for 2 seconds
to go to the Main Menu
BACK
Cycles the display through
the units of output
PRIME
Runs pump at 100% speed
while button is pressed
ON/OFF
Turns pump control ON or OFF
WARNING: DOES NOT remove power.
NOTE: Displayed outputs are approximate and may be rounded off. For some units of measure, flows close to zero may
display zero.
