US and Canada 800.683.2378, International 904.641.1666
S Series FW 3.02.02
65
OPERATING DISPLAY
continued
CYCLE
100
%
Run Pump?
Yes
yes/no
select
CYCLE
950.0
SEC
Prime
CYCLE
50
%
CYCLE
22
RPM
Hold for 2 seconds
CYCLE
OFF
SEC
To Password Entry Display if display is
locked. To
Main Menu
if unlocked.
If unlocked or
password not set.
Metric is displayed if
selected in
Configuration
Pump runs at 100% speed while
the PRIME button is pressed (if
unlocked or password not set).
Display counts down seconds to next run.
CYCLE
999
SEC
CYCLE
0.83
GPH
CYCLE
1.77
oz/min
CYCLE
20.0
GPD
Display counts down seconds when running
CYCLE TIMER
NAVIGATION IN OPERATING MODE
• If a password is set, the pump controls will lock out after 60 seconds if there is no keypad activity.
• To unlock the pump, press ENTER for 2 seconds. The pump will display a prompt to enter a password.
ENTER
Press and hold for 2 seconds
to go to the Main Menu
BACK
Cycles the display through
the units of output
PRIME
Runs pump at 100% speed
while button is pressed
ON/OFF
Turns pump control ON or OFF
WARNING: DOES NOT remove power.
NOTE: Displayed outputs are approximate and may be rounded off. For some units of measure, flows close to zero may
display zero.
