Hall Effect
US and Canada 800.683.2378, International 904.641.1666
S Series FW 3.02.02
67
OPERATING DISPLAY
continued
Reset Alarm?
Yes
yes/no
select
Hall Effect
Low Flow
Process
Hall Effect
High Flow
Process
0-10VDC
High Signal
VDC
4-20mA
Low Signal
mA
PPM Feed
High Flow
Process
PULSE
OVERRUN
SIGNAL
(Control Mode)
Standby
(Control Mode)
TUBE CHANGE
%
(Control Mode)
Off
(Control Mode)
Tube Leak
%
(Control Mode)
DRIVE FAULT
%
PPM Feed–
Variable
Pulse
Can be
any
Control
Mode
If password was not set.
If password was set, ENTER
PASSWORD first.
If password was entered
incorrectly, the display
shows INCORRECT
PASSWORD for 3 seconds
and then returns to the
beginning of alarm.
If yes, reset all alarms.
If no, do not reset alarms.
DISPLAY ALARMS
Go to
Main Menu
Not all alarms apply to all modes.
Operating modes are displayed in the
upper left corner.
When a pump condition occurs, an active
display alarm appears and blinks 3 times
in succession.
The screen cycles between showing the
display alarms and showing the operating
screen until the alarms are reset.
4-20mA
or
0-10VDC
The
(selected
control
mode)
appears in
upper left
corner
Return to
Selected Control Mode
When ON/OFF is pressed
again, display returns to
selected control mode.
