background image

OPERATING MANUAL

AIR-POWERED

PUMP DRIVES

Model No.

7569-00

Cole-Parmer Instrument Co.

625 East Bunker Ct.

Vernon Hills, Illinois U.S.A. 60061-1844

800-MASTERFLEX (627-8373)

(847) 247-2929 FAX

www.masterflex.com

e-mail: [email protected]

A-1299-0105

Edition 07

®

®

WARRANTY

Use only MASTERFLEX precision tubing with MASTERFLEX pumps 
to ensure optimum performance. Use of other tubing may void 
applicable warranties.

The Manufacturer warrants this product to be free from significant deviations from
published specifications. If repair or adjustment is necessary within the warranty
period, the problem will be corrected at no charge if it is not due to misuse or
abuse on your part, as determined by the Manufacturer. Repair costs outside the
warranty period, or those resulting from product misuse or abuse, may be invoiced
to you.

The warranty period for this product is noted on the Warranty Card.

PRODUCT RETURN

To limit charges and delays, contact the seller or Manufacturer for authorization and
shipping instructions before returning the product, either within or outside of the
warranty period. When returning the product, please state the reason for the return.
For your protection, pack the product carefully and insure it against possible damage
or loss. Any damages resulting from improper packaging are your responsibility.

TECHNICAL ASSISTANCE

If you have any questions about the use of this product, contact the Manufacturer
or authorized seller.

8

Printed in U.S.A.

070900

Cole

Parmer

®

Summary of Contents for Masterflex L/S 7569-00









Reviews: