T
ECHNICIAN FUNCTIONS:
communicating with the screen.
( ) Evaluate all sensors positioning on the
( ) Verify that the nuts are tight on the Sensors
machine.
with orange connectors, since it is responsible
( ) Calibrate the machine.
for sealing the sensors, to tighten you will hear
OPERATOR INSTRUCTIONS REGARDING:
3 snaps when tight, no tools are needed.
( ) General machine lubrication.
( ) Inspect the Chassis Grounding points of the
machine, verify that all points are secured and
( ) Daily hardware tightening.
that there is no paint on the welded grounding
( ) Proper working speeds.
bolts, making sure that they have been sanded.
( ) General machine cleaning.
( ) Show the steps to access the Saved
( ) Instruction manual, warranty certificate
Events,
and warranty claims.
along with information explain to the client and
SENSOR
operator that all processed commands on the
( ) Show all steering column functions,
On-Board Sensor Computer remain saved in
blinkers, warning flasher, headlights,
EVENTS. In the Information, the latest machine
floodlights, windshield washer, windshield
version is shown, should the need arise for that
wipers, radio and beacon.
information.
( ) Turn-on the machine and show all
( ) Inform the client and the operator that there
operations of the on-board computer
should not be any changes to the relay panel,
functionality like the sensors, the hand-brake
unless authorized by Stara, for any
to
modifications can damage the machine, since
ladder unfolding correlation, the start-up
switch
it has been designed specifically and solely for
to the distribution discs and their on-
the safe operation of the machine.
screen/rear operation verification, the E-kill
switch and the joystick functions like:
application, Auto-Pilot and gear changing.
TOPPER DRIVER 2 WAS AUTO-PILOT
( ) Scroll through the Sensor panel, explain
( ) Verify wheel angle sensor tightness.
its
( ) Verify POD positioning.
adjustment functions and the machine
( ) Gage the auto-pilot’s job route as used by
diagnostics displays like, the Water
customer.
Temperature, Oil, Transmission; verify that
( ) Verify hydraulic operation.
the
( ) Verify right and left valve operations.
Joystick and Console control functions are
