The same happens coming out of overlap. The slide-gate will
open,
200 mm
but the product will delay to drop, for it will have to run the
on the conveyor until it reaches the drop into the discs,
as shown
on the figures below:
On the left slide-gate you can see the the path which the product will need to travel
until it drops into the discs, while the right side will already begin to drop correctly. .
On perpendicular overlaps both sections shall be turned off, there should not be
any problems when turning on or turning off the application, as shown on the
figures below:
Figure 27
Figure 28
Figure 29
Open slide-gate
Open slide-gate
40
