Star Micronics TSP400 Series, Programmer'S Manual

Page: 48 / 136

– 45 –
PAGE MODE
Parameter
n1
n2
n3
n4
Setting
Sensor select
Start-position detect
Zero style
International character set
1
Transmissive sen-
sor
ON
Slashed zero
See below
0
Reflective sensor
(Black mark)
OFF
Normal zero
(Default)
n4 Country
0 USA
1 France
2 Germany
n4 Country
3 UK
4 Denmark #1
5 Sweden
n4 Country
6 Itary
7 Spain #1
8 Japan
n4 Country
9 Norway
A Denmark #2
B Spain #2
n4 Country
C Latin America
2) Use N=2 to set option-related settings. Parameters are as
follows.
n1 : Always “0” (TSP400)
n2 : Cutter installed status
n3 : Always “0”
n4 : Printing speed
EXAMPLE 1
LPRINT CHR$(&H1B);“#1,010A”;CHR$(&H0A); CHR$(&H00);
LPRINT CHR$(&H1B);“#2,0100";CHR$(&H0A); CHR$(&H00);
LPRINT CHR$(&H1B);“?”;CHR$(&H0A); CHR$(&H00);
Sensor : Reflective sensor
Start position detect : ON
Zero style : Normal Zero
International character set : Denmark #2
Cutter :
Valid
Printing speed : 50 mm/sec
n Setting 0 1
n2 Cutter Invalid(TSP412) Valid(TSP442)
n4 Printing speed 50 mm/sec(Default) 25 mm/sec