Star Micronics TSP400 Series, Programmer'S Manual

Page: 98 / 136

– 95 –
LINE MODE
3) Use N=3 for folloing settings
n1 :Always “0”
n2 :Character table
n3 :Print column
n4 :Line feed, CR code
n Setting 0 1 2 3
n2 Character table Normal IBM Katakana IBM
n3 Print colum 40 50 – –
n4 Line feed (mm) 4 3 4 3
CR code Invalid Invalid Valid Valid
EXAMPLE 1
LPRINT CHR$(&H1B);“#1,010A”;CHR$(&H0A); CHR$(&H00);
LPRINT CHR$(&H1B);“#2,0100”;CHR$(&H0A); CHR$(&H00);
LPRINT CHR$(&H1B);“?”;CHR$(&H0A); CHR$(&H00);
Sensor: Reflective sensor
Start position detect: ON
Zero style: Normal Zero
International character set: Denmark #2
Cutter:
Valid
Printing speed: 50 mm/sec
EXAMPLE 2
LPRINT CHR$(&H1B);“#1,1111”;CHR$(&H0A); CHR$(&H00);
LPRINT CHR$(&H1B);“?”;CHR$(&H0A); CHR$(&H00);
Sensor: Transmissive sensor
Start position detect: ON
Zero style: Slashed zero
International character set: France